INSTRUCTIONS FOR USE
Cleaning
Disassemble all the parts of the feeding bottle before washing
Before using the product, wash all the various parts/especially the teat by hand using standard washing up liquid. Rinse thoroughly and dry carefully with a soft cloth. Do not use abrasive or aggressive products, then place the feeding bottle with all its various parts, into boiling water for 5 minutes. allow to cool down before use.
As soon as you have finished using the feeding bottle, wash it together with all its various parts using standard washing up liquid. Do not turn the teat inside out to clean it as this may damage it. Use a teat brush making sure you do not damage the teat valve or the hole through which the milk flows
The feeding bottle and its various parts (except the teats) can be washed in the dish waster
WARNING: Always rinse the feeding bottle and its various parts under running water when they have been washed in a dishwasher. As the dish-washer is more aggressive than hand washing, the material may become dull and the decorations may fade, do not use feeding bottles or their various parts when there is sign of wear and tear, replace them immediately
Always clean it before use.
Dry the washed feeding bottle and all the various parts thoroughly and store them in a dry and clean place away from direct sunlight or heat sources.
Some foodstuffs such as fruit juice, tea or camomile could stain the feeding bottle and its various parts, especially silicon teats. Try not to allow teats to come into contact with oilly foods such as sauces or condiments.
Sterilization:
All Chica feeding bottles can be disinfected using cold methods, Le, with specific liquid disinfectant by using hot methods with steam provided by electric disinfection devices or disinfection devices that are used in standard or microwave ovens jor traditional 5 minute bolling on the stove
The product except the feeding bottles belonging to the Wellbeing 0% BPA range in Polypropyleneican be disinfected in an autoclave with 15 minute cycles at 121 C
using distilled water as no additives are necessary, it is recommended not to exceed 30 disinfection cycles
Do not use ultraviolet ray sterilizers
Make sure you have washed your hands thoroughly before extraction and handing the leeding bottle and its various parts after disinfection has been completed Assembly
Make sure the cap ring is screwed correctly onto the feeding bottle to avoid any leaking Make sure the teat is fitted correctly on the feeding bottle cap, by pulling its tip upwards Well Being First Days Angled Feeding Bottle:
before filling the bottle with milk or other food and/or drinks, make sure that the silicion memories positioned with the centre ridge facing upwards and the bottom is screwed on correctly
Please be very careful when using the microwave to heat the bottle. The contents may not have been tested everly always shake the heated milk, or other food and/or drink, well to make sure the temperature is distributed evenly, attention, always check the temperature of the milk or other food and/or drink before giving it to your baby